Easily view asset data from your Vermeer equipment in T3 with the VermeerOne integration. With a quick setup, you can bring select telematics data from VermeerOne-enabled machines directly into your T3 Fleet platform via the AEMP Telematics Standard (ISO 15143-3), no additional hardware required.
Note that Vermeer does not provide Odometer readings via its AEMP integration.
For more information on the capabilities of AEMP integrations in T3, check out the T3 OEM Integrations Overview article.
What You Need Before You Start
The VermeerOne integration requires a few pre-requisites to ensure a smooth setup.
Asset & Hardware Requirements
Your equipment must have Vermeer's Telematics Control Unit (TCU) and antenna installed from the factory, or added later.
Account & Subscription Access
An active VermeerOne subscription with machines assigned and sending data. If you’re unsure, contact your Vermeer dealer or support.
An active T3 subscription is required.
User Credentials & Permissions
Valid API Key. Don't have an API Key?
Manager or Admin-Level role within T3.
Setting Up the VermeerOne Integration
Log into T3 Fleet.
Navigate to the Company page and select the Integrations tab. The Integrations homepage will display.
Locate the VermeerOne integration and select Add integration.
Enter the credentials you received from Vermeer:
API Key
Note: Your credentials must be requested from Vermeer. See How to Request Your Credentials below to learn more.
Click Submit credentials. T3 will validate the credentials and begin syncing your VermeerOne data.
You will be returned to the OEM Integrations page.
The integration status will be Pending while the data imports.
Once the feeds for the equipment in your Vermeer fleet are available in T3, the status of the card will change to Connected.
Once the integration has a Connected status, you can begin assigning the feeds to assets created in T3. The feeds appear in T3 as tracker devices. For more information, see Assigning a Tracker Device to An Asset in T3.
How to Request Your VermeerOne Credentials
To enable the integration, you’ll need to request API credentials directly from Vermeer support.
Who to email:
Contact the Vermeer Support Team at mysupport@vermeer.com.
In your message, identify yourself as the Equipment Manager for your assets.
Email template (copy/paste):
Subject: Request for VermeerOne API Credentials (AEMP 2.0) for T3 Integration
Hi Vermeer Support Team,
<Your Company Name> is requesting to pull our VermeerOne API feed into our T3 platform. I am the Equipment Manager for these assets and am requesting this feed for our T3 account.
Could you please provide the API Key required to communicate with your API (AEMP 2.0 / ISO 15143-3)?
Details:
Company: <Company Name>
Equipment Manager Contact: <Your Name, Email, Phone>
Sample Machine Serials: <List a few>
Intended Use: Read-only data ingestion into T3
Thank you!
<Your Name>
<Title>
<Email | Phone>
What to expect:
After receiving the credentials, go to T3 → Company → Integrations → Vermeer VermeerOne, enter the API key, and submit to start the data sync.