To Activate Keypads:

  1. Before starting, pull out all E-Stop buttons.

  2. Enter the start code on the keypad.

  3. Press and hold ENTER to turn the ignition on.

LED Behaviors

Button Press

Blue LED 2

Invalid Code Entered

Flashing Red LED 1

Valid Code Entered

Green LED 4

Keypad Stalled [changed from stuck in bootloader]

Flashing Red LED 1

Lost Tracker Communication

All LEDs flashing Red/Blue

To Activate Keypads with START and ENTER:

  1. Enter the assigned code.

  2. Press ENTER.

  3. Press START to turn on the machine.

LED Behaviors

Button Press

Blue LED 2

Invalid Code Entered

Flashing Red LED 1

Valid Code Entered

Solid Green LED 4, Solid Blue LED 2

(device will time out after 5 minutes in this state)

Valid Code Entered and START held at least once

Solid Blue LED 2, Solid Green LED 4

(device will no longer time out in this state)

Valid Code Entered and START pressed at least once

Solid Green LED 2, Solid Green LED 4

(device will no longer time out in this state)

Keypad Stalled

Flashing Red LED 1

Lost Communication

All LEDs flashing Red/Blue

To Activate the Keypads with GRND and PLTFM:

  1. Before starting, pull out all E-Stop buttons.

  2. Enter the start code on the keypad.

  3. Press and hold ENTER to turn the ignition on. The machine is now in ground mode.

To turn the machine to Platform mode:

  1. Enter the assigned code.

  2. Press the PLTFM button on the keypad.

  3. Press ENTER.

LED Behaviors

Button Press

Blue LED 2

Invalid Code Entered

Flashing Red LED 1

Valid Code Entered

Solid Green LED 1, Solid Green LED 2

(ground state)

Valid Code Entered in Platform Mode (last button press was PLTFM)

Solid Green LED 2, Solid Green LED 4

Keypad Stalled

Flashing Red LED 1

Lost Communication

All LEDs flashing Red/Blue

To Activate the Keypads with GLOW:

  1. Enter the assigned code.

  2. Press ENTER.

  3. If the Amber LED 1 illuminates, press GLOW for 10-20 seconds.

  4. Press START.

LED Behaviors

Button Press

Blue LED 2

Invalid Code Entered

Flashing Red LED 1

Valid Code Entered

Solid Yellow LED 1, Solid Yellow LED 2, Solid Green LED 4

Valid Code Entered and Glow Held

Solid Green LED 1, Solid Blue LED 2, Solid Green LED 4

Valid Code Entered and START Held at least once

Solid light Blue LED 2, Solid Green LED 4 (device will no longer time out in this state)

Valid Code Entered and START pressed at least once

Solid Green LED 2, Solid Green LED 4

(device will no longer time out in this state)

Keypad Stalled

Flashing Red LED 1

Lost Communication

All LEDs flashing Red/Blue

To Turn the Machine Off:

  1. Press OFF or use E-Stop buttons.

Important: The machine must be turned off with either the keypad's off button or the E-Stop button. If the E-Stop button is out, the ignition remains on and the machine's battery will drain.

Did this answer your question?