Key Differences: V1 vs V2
Form Factor: V1 has a vertical casing; V2 has a horizontal casing.
SD Card Slot: V1 slot is on the bottom; V2 slot is on the side.
Power & Mounting: V1 and V2 power boxes and camera mounts are not interchangeable.
LED Indicators: V2 removes nonessential LED lights to simplify status indication.
Swapping from V1 to V2
When replacing a V1 camera with a V2 due to an Return Merchandise Authorization (RMA), you must also replace the window mount and power box.
Remove V1 Hardware
Detach the V1 camera mount and clean the windshield surface.
Remove the V1 power box and disconnect its cable.
Unplug the V-Display (if connected).
Install V2 Hardware
Securely mount the V2 power box to a rigid structure.
Mount the V2 camera near the center of the windshield.
Reconnect the V-Display to the new power box.
Set Up & Confirm
Calibrate the V2 camera with the Titan app.
Start the vehicle to power on the camera.
Press the camera button to confirm video transmission.
Use the tuck tool to route cables neatly behind panels.